Jacksonville homeowners face a specific challenge that most paint guides overlook: Northeast Florida’s climate is one of the harshest environments for exterior paint in the entire country. Intense UV radiation, near-daily summer thunderstorms, year-round humidity above 70%, and coastal salt air combine to shorten the life of inferior paint systems dramatically.

This guide covers everything you need to make a confident, well-informed decision — the best paint brands, the right coating types for each surface, which finishes perform best in Florida, color strategies that resist fading, and realistic lifespan expectations.

Who wrote this: A New Leaf Painting has been serving Jacksonville and Northeast Florida homeowners since 2003. We have completed more than 5,000 exterior painting projects and hold hundreds of verified five-star reviews. The product recommendations in this guide reflect real-world performance data from two decades of Florida painting, not manufacturer marketing claims.

Quick Answer

The best exterior paints for Jacksonville homes are premium acrylic latex products — specifically Sherwin-Williams Emerald or Duration, and Benjamin Moore Aura or Regal Select. For stucco homes (the most common exterior in Florida), elastomeric coatings are the top recommendation. These products resist UV fading, mildew, moisture, and salt air better than standard hardware-store paint.

A properly prepared and painted Jacksonville home should last 8–15 years before needing a full repaint.

---

Why Jacksonville’s Climate Demands Specialized Exterior Paint

Jacksonville, Florida presents four overlapping environmental threats to exterior paint that rarely occur together in other U.S. markets. Understanding each one helps explain why professional painters here consistently choose premium coating systems over budget alternatives.

1. UV Radiation and Rapid Color Fading

Florida receives more annual solar radiation than nearly any other state. UV rays are the primary cause of paint fading — they break down pigment molecules at the molecular level, causing even bold colors to look washed-out within two or three years if the paint lacks UV inhibitors. Premium acrylic latex paints like Sherwin-Williams Emerald contain advanced UV-blocking technology that dramatically slows this breakdown.

Pro Tip: Lighter colors (whites, beiges, light grays, and pastels) retain their appearance longer in Florida sun than dark or saturated colors. If you love a bold color, ask your painter about the specific fade-resistance rating before committing.

2. Humidity and Mildew Growth

Jacksonville averages relative humidity between 70% and 90% for much of the year. Moisture in the air — and on surfaces after rain — creates ideal conditions for mildew and mold to grow on exterior walls. Paint that is not specifically formulated with mildewcide additives will show dark staining within one to two years. This is not a cosmetic issue only — mildew can accelerate paint failure by breaking down the coating’s adhesion to the substrate beneath it.

3. Salt Air Exposure in Coastal and Intracoastal Areas

Homes within a few miles of the Atlantic coast, the Intracoastal Waterway, or the St. Johns River face accelerated paint degradation from airborne salt. Salt is corrosive — it attacks paint film, promotes rust on any metal surfaces, and can cause wood and masonry substrates to break down faster than in inland areas. Homes in Ponte Vedra, Atlantic Beach, Neptune Beach, Jacksonville Beach, and along the Intracoastal should always use paint products rated for marine or coastal environments.

Local Note: If your home is within two miles of salt water, ask specifically for coatings rated for coastal or marine environments. Standard residential exterior paint — even premium lines — is not optimized for salt air chemistry.

4. Heavy Rain, Storm Season, and Moisture Infiltration

Jacksonville receives approximately 52 inches of rain per year — well above the U.S. average of 38 inches. June through September brings near-daily afternoon thunderstorms. Paint that lacks proper moisture resistance allows water to infiltrate at cracks, joints, and porous substrate areas, leading to peeling, bubbling, wood rot, and stucco damage. High-quality acrylic latex and elastomeric coatings form a continuous film that repels water rather than absorbing it.

 

Climate Threat	Primary Damage	Recommended Defense
Intense UV Sun	Color fading, film breakdown	UV-inhibitor acrylic (e.g., SW Emerald)
High Humidity	Mildew, adhesion loss	Mildewcide-fortified acrylic latex
Salt Air (Coastal)	Accelerated film failure	Marine-rated or coastal-grade coating
Heavy Rain / Storms	Moisture infiltration, peeling	Elastomeric or water-resistant acrylic

---

Best Exterior Paint Brands for Jacksonville Homes

Professional painters in Jacksonville consistently rely on two manufacturers whose premium product lines are engineered for the conditions described above: Sherwin-Williams and Benjamin Moore. Both companies invest heavily in product testing for humid, coastal, and high-UV environments.

---

Sherwin-Williams Exterior Paint

Sherwin-Williams is the most widely specified paint brand among professional exterior painters in the southeastern United States. Their tiered product line offers options at every performance level.

Sherwin-Williams Emerald Exterior Acrylic Latex — Best Overall

Emerald is Sherwin-Williams’ flagship exterior product and the top recommendation for Jacksonville homes where maximum longevity is the goal. It features ColorAccurate technology for fade resistance, a thick film build for superior moisture protection, and advanced mildew resistance. It is one of the few residential paints independently tested to retain color significantly longer than standard acrylic products under Florida UV conditions.

• Best for: Any exterior surface where maximum durability and color retention are the priority
• Typical coverage: 400 sq ft per gallon at recommended film thickness
• Key advantage in Jacksonville: Class-leading UV and fade resistance

Sherwin-Williams Duration Exterior Acrylic Latex — Best for Mildew Resistance

Duration features Sherwin-Williams’ PermaLast technology, which creates a thick, flexible coating with outstanding adhesion and resistance to peeling. Its built-in mildew-resistant coating makes it an excellent choice for Jacksonville’s humid environment. Duration is the product most commonly specified for homes that have had mildew problems in the past.

• Best for: Homes with a history of mildew growth; fiber cement siding; wood
• Key advantage in Jacksonville: Industry-leading mildew resistance for humid climates

Sherwin-Williams SuperPaint Exterior — Best Value Premium

SuperPaint sits one tier below Emerald and Duration but still outperforms most paint products sold in home improvement stores. It provides excellent adhesion, good fade resistance, and a reliable weather barrier at a more accessible price point. It is a solid choice for homeowners who want professional-grade protection without the premium-tier cost.

• Best for: Budget-conscious homeowners wanting professional-grade performance
• Key advantage in Jacksonville: Strong performance-to-cost ratio for Florida conditions

Benjamin Moore Exterior Paint

Benjamin Moore is especially known for depth of color and consistency of finish. Their exterior products are used extensively by professional painters throughout Florida.

Benjamin Moore Aura Exterior Paint — Best Color Retention

Aura uses Benjamin Moore’s proprietary Color Lock technology, which bonds pigment more securely within the paint film and prevents fading better than virtually any other residential exterior product. If color accuracy and long-term vibrancy are your top priorities — particularly for deep or custom colors — Aura is the strongest choice on the market.

• Best for: Homes with bold or custom colors; high-UV exposure
• Key advantage in Jacksonville: Superior pigment lock for deep colors in intense Florida sun

Benjamin Moore Regal Select Exterior — Best Premium Mid-Tier

Regal Select provides premium performance with excellent adhesion to common Florida exterior surfaces, including fiber cement, wood, and primed stucco. It delivers a smooth, uniform finish and holds up well against Florida weather. It is a strong competitor to Sherwin-Williams Duration at a similar price point.

• Best for: Fiber cement (Hardie Board) siding; wood trim; second-story siding
• Key advantage in Jacksonville: Smooth, consistent finish on textured and flat surfaces

 

Product	UV/Fade Resist.	Mildew Resist.	Best Surface	Performance Tier
SW Emerald	Excellent	Excellent	All exteriors	Premium+
SW Duration	Very Good	Excellent	Wood, fiber cement	Premium
SW SuperPaint	Good	Good	Most surfaces	Mid-Premium
BM Aura	Excellent	Very Good	All exteriors	Premium+
BM Regal Select	Very Good	Good	Fiber cement, wood	Premium

Exterior Paint Types: Which Formula Is Right for Your Jacksonville Home?

Choosing the correct paint formula — not just brand — is one of the most important decisions in an exterior painting project. The two primary coating systems used on Florida homes are acrylic latex paint and elastomeric coatings, and they serve different purposes.

Acrylic Latex Exterior Paint — Recommended for Most Homes

Acrylic latex is the dominant exterior coating type used by professional painters in the United States. For Jacksonville homes, it offers the ideal combination of flexibility, adhesion, moisture resistance, and workability.

Why acrylic latex works in Florida’s climate:

• Flexibility: Florida temperatures can swing 30–40°F between seasons. Acrylic paint expands and contracts with surfaces rather than cracking or splitting.
• Moisture resistance: Properly applied acrylic latex creates a continuous film that sheds water rather than absorbing it.
• Mildew resistance: Premium acrylic products contain mildewcide additives that actively inhibit mold and mildew growth.
• Adhesion: Acrylic latex bonds well to wood, fiber cement, previously painted surfaces, and properly primed stucco and masonry.
• Maintenance: Acrylic surfaces are easy to clean and spot-touch without leaving visible patches.

---

Elastomeric Coatings — The Standard for Florida Stucco Homes

---

Choosing the Right Exterior Paint Finish for Jacksonville Homes

Paint finish (also called sheen level) affects both the appearance and durability of a paint job. The correct finish depends on the specific surface being painted and the amount of exposure it receives.

Flat / Matte Finish — Best for Stucco Walls

Flat finish has no reflective sheen and gives exterior walls a natural, matte appearance. It is the preferred finish for stucco homes because it hides minor surface imperfections and texture variations without drawing attention to them with reflective light. Flat finish is also easier to touch up without visible sheen differences.

Limitation: Flat finishes are harder to clean than satin or semi-gloss and are more susceptible to mildew staining in humid environments. Some premium flat products add washability, but flat is generally not recommended for trim or surfaces that get dirty frequently.

Satin Finish — The Most Popular Choice for Jacksonville Siding

Satin finish provides a low-luster sheen that is simultaneously more durable and easier to clean than flat — making it the most popular choice for exterior siding in Florida. The slight sheen adds curb appeal while the harder film surface resists dirt, mildew, and moisture better than flat.

Satin is the correct choice for fiber cement siding (Hardie Board), wood siding, smooth stucco, and most large wall surfaces. It is the default recommendation for the main body of most Jacksonville homes.

Semi-Gloss Finish — The Standard for Trim, Doors, and Shutters

Semi-gloss has a noticeably reflective surface that is highly durable, easy to clean, and resistant to moisture. These properties make it the professional standard for exterior trim, window frames, doors, shutters, soffits, and fascia — surfaces that receive direct weather exposure and frequent handling.

The visual contrast between a satin main body and semi-gloss trim is one of the most effective and timeless looks for Florida homes. It gives a home a crisp, finished appearance that reads as well-maintained from the street.

 

Finish	Best Surface	Durability	Cleanability
Flat / Matte	Stucco walls	Moderate	Difficult
Satin	Siding, smooth walls	Good	Easy
Semi-Gloss	Trim, doors, shutters	Excellent	Very Easy

Exterior Paint by Surface Type: Jacksonville Home Substrates

Jacksonville homes are built with a handful of common exterior materials, each requiring a specific approach to preparation and coating selection. Using the wrong product for the surface is one of the most common reasons paint fails prematurely.

Stucco — The Most Common Florida Exterior

Stucco is the dominant exterior finish on Florida homes, particularly those built after 1970. It is durable and weather-resistant when properly maintained, but it develops hairline cracks from thermal movement and normal settling.

• Recommended coating: Elastomeric coatings are the top choice. They bridge cracks and create a waterproof membrane across the full surface.
• Alternative: High-build acrylic latex paint (two coats minimum) for stucco in good condition with no active cracking.
• Critical prep step: Pressure wash to remove dirt, mildew, and chalky paint residue. Fill cracks larger than 1/16 inch with elastomeric caulk before painting.
• Avoid: Oil-based paints on stucco. They trap moisture and lead to accelerated failure in Florida’s humidity.

Fiber Cement Siding (Hardie Board) — Common on Newer Jacksonville Homes

Fiber cement siding has become the most popular siding material for new home construction in Northeast Florida over the past 20 years. It is dimensionally stable, termite-resistant, and holds paint exceptionally well when properly maintained.

• Recommended coating: Premium acrylic latex (Sherwin-Williams Duration or Emerald, or Benjamin Moore Aura or Regal Select) in satin finish.
• Critical prep step: Inspect and replace any caulking at joints and corners. Fiber cement absorbs water at exposed edges, so all cut edges and joints must be sealed.
• Note on factory-primed fiber cement: Hardie Board comes factory-primed, but that primer is designed to be topcoated within 90 days. If the home has been weathered longer, spot-prime before painting.

Wood Siding — Older Jacksonville Homes and Custom Builds

Wood siding requires more preparation and maintenance than stucco or fiber cement, but it can hold a beautiful finish for years when properly treated.

• Recommended coating: High-quality acrylic latex in satin finish, applied over a full coat of oil-based or shellac-based primer.
• Critical prep step: Check for rot, especially at lower courses, around windows, and at trim intersections. Replace any rotted boards before painting — paint will not fix structurally compromised wood.
• Note: Wood is the most sensitive substrate to moisture. Any gaps in caulking or failed paint film should be addressed promptly to prevent water infiltration and rot.

Brick and Masonry

Brick and concrete block are porous materials that require breathable coatings to prevent trapped moisture from damaging the masonry.

• Recommended coating: Breathable masonry paint or acrylic latex with high vapor permeability. Do not use vapor-barrier coatings like elastomeric on unpainted brick unless the entire wall will be coated.
• Critical prep step: Remove any efflorescence (white salt deposits) with a masonry cleaner before painting. Painting over efflorescence causes rapid adhesion failure.
• Important note: Painting over unpainted brick is essentially permanent. It requires repainting every 5–10 years and is difficult to reverse.

 

Best Exterior Paint Colors for Jacksonville Homes

Color selection for a Jacksonville home involves both aesthetic preference and practical performance considerations. Florida’s intense sun affects colors differently than in cooler, cloudier climates.

Performance Principles for Florida Color Selection

• Lighter colors last longer. Light and medium-value colors fade more slowly than dark, saturated colors because they reflect more UV radiation rather than absorbing it.
• Cool tones outperform warm darks. Dark browns, deep reds, and navy blues fade faster than light blues, grays, and whites under Florida sun.
• LRV (Light Reflectance Value) matters. Colors with an LRV above 45 perform noticeably better in Florida conditions. Ask your painter or Sherwin-Williams / Benjamin Moore rep for LRV data on any color you are considering.

Most Popular Color Palettes for Northeast Florida

Coastal Blues and Seafoam

Soft, muted coastal blues — from pale sky blue to seafoam and light aqua — are among the most popular colors for Jacksonville homes, particularly near the beaches and Intracoastal. They complement the natural environment and hold up well in Florida’s sun. Classic pairing: coastal blue body, bright white trim, charcoal shutters.

Warm Beige and Sand Tones

Warm beige, cream, and sandy tan are perennial favorites that blend naturally with Florida’s landscape. Their light pigments resist UV fading better than most other color families, making them practical as well as attractive. Classic pairing: warm beige body, white or ivory trim, dark bronze accents.

Modern Light Gray

Light and medium grays have become the dominant trend in Florida exterior colors over the past decade. They are clean and architectural, pair with virtually any trim color, and perform very well in high-UV environments. Classic pairing: light gray body, bright white trim, black or dark charcoal shutters and doors.

Classic White

Crisp white exteriors are timeless and particularly well-suited to Florida’s bright sunlight and architectural traditions. White reflects heat and UV radiation more effectively than any other color, which contributes to longer paint life. Classic pairing: white body, contrasting dark trim (black, navy, dark green, or charcoal).

Muted Sage and Earth-Tone Greens

Muted greens — sage, moss, soft olive — have grown consistently in popularity across Northeast Florida. They evoke the natural landscape and work well with the tropical vegetation common in Jacksonville yards. Pair with warm white, cream, or natural wood trim for an organic, relaxed look.

---

Why Surface Preparation Determines How Long Your Paint Job Lasts

The single most important factor in exterior paint longevity is surface preparation — not the brand of paint. A $90-per-gallon premium coating applied over a dirty, chalky, or cracked surface will fail just as quickly as a $30 product. Proper prep is what allows premium paint to achieve its rated lifespan.

The professional preparation process used by A New Leaf Painting on every Jacksonville exterior:

Step 1: Pressure Washing

Every surface must be cleaned before painting. Pressure washing removes mildew, algae, dirt, salt residue, and chalky old paint that would prevent adhesion. In Jacksonville’s humid climate, even a relatively new home can accumulate significant mildew growth on the north and west sides. We allow surfaces to fully dry — typically 24 to 48 hours — before applying any coating.

Step 2: Surface Inspection and Repairs

After cleaning, we inspect every surface for damage: cracks in stucco, rot in wood, loose or separating siding, and failed caulking. Any structural damage is repaired before painting. Painting over damaged surfaces temporarily hides problems while allowing them to worsen underneath.

Step 3: Caulking All Joints and Penetrations

We recaulk all joints, seams, window frames, door frames, trim intersections, and utility penetrations with high-quality paintable caulk. In Jacksonville, where rain is frequent and intense, even a small gap at a window frame can allow significant water infiltration during a storm. Fresh caulk is critical.

Step 4: Priming Where Required

Not all surfaces need priming before topcoating, but some require it for the paint to perform as designed. Bare wood must always be primed. Repaired stucco patches must be primed to even out porosity. Severe tannin staining, rust staining, and water staining require spot-priming with appropriate stain-blocking products. Skipping primer on these surfaces leads to bleed-through and adhesion problems.

Step 5: Applying Multiple Coats to Specification

Most premium exterior paints are designed to be applied in two coats at a specific wet mil thickness. Applying only one coat — or stretching paint too thin to cover more area — reduces film thickness below the manufacturer’s design parameters, which shortens lifespan. A properly applied two-coat system is what allows paint to reach its rated 10 to 15 year lifespan in Jacksonville.

What to ask your painter: How many coats will you apply, and at what mil thickness? If a painter cannot answer that question, it is a red flag.

 

How Long Does Exterior Paint Last in Jacksonville, Florida?

Paint lifespan in Northeast Florida depends on four variables: surface type, paint quality, preparation quality, and environmental exposure. The figures below assume professional preparation and application of a premium-grade coating system.

 

Surface	Budget Paint	Premium Paint	Key Variable
Stucco (inland)	3–5 yrs	8–12 yrs	Elastomeric vs. standard acrylic
Stucco (coastal)	2–4 yrs	6–9 yrs	Salt air exposure level
Fiber Cement Siding	5–7 yrs	10–15 yrs	Caulk maintenance at joints
Wood Siding	3–5 yrs	7–10 yrs	Primer quality; moisture control
Exterior Trim	3–4 yrs	5–8 yrs	Exposure; semi-gloss finish
Brick / Masonry	4–6 yrs	8–12 yrs	Breathable coating use

 

Bottom line: In Jacksonville’s climate, the difference between budget paint and a premium product applied with proper preparation is typically 5 to 8 additional years of lifespan. Over the life of a home, that difference saves most homeowners two to three full repaints.

---

Frequently Asked Questions: Exterior Paint in Jacksonville, FL

The following questions are based on the most common inquiries we receive from Jacksonville homeowners, as well as questions frequently searched online. Each answer is written to be directly useful whether you are reading this guide or asking a voice assistant or AI tool.

 

What is the best exterior paint for Florida homes?

The best exterior paint for Florida homes is a premium acrylic latex product formulated for high-UV and high-humidity environments. The top-performing products for Florida conditions are Sherwin-Williams Emerald Exterior and Benjamin Moore Aura Exterior — both provide excellent UV resistance, mildew resistance, and moisture protection. For stucco homes specifically, elastomeric coatings outperform standard acrylic paint by bridging hairline cracks and forming a waterproof membrane.

 

What exterior paint brand do professional painters use in Jacksonville?

Professional painters in Jacksonville most commonly specify Sherwin-Williams and Benjamin Moore products for exterior residential projects. Sherwin-Williams Emerald and Duration are frequently used for their superior mildew resistance and durability in Florida’s climate. Benjamin Moore Aura is a top choice when color retention and rich color depth are priorities. Both brands maintain regional distribution in Northeast Florida with consistent quality control.

 

How often do Jacksonville homes need to be repainted?

Most Jacksonville homes need exterior repainting every 8 to 12 years when professional-grade paint is applied over properly prepared surfaces. Homes in coastal areas near the Atlantic or Intracoastal Waterway may need repainting every 6 to 9 years due to salt air exposure. Homes painted with budget-grade products or poorly prepared surfaces may need repainting as frequently as every 3 to 5 years.

 

Is elastomeric paint better for stucco homes in Florida?

Yes. Elastomeric coatings are the professional standard for stucco homes in Florida for two primary reasons. First, elastomeric coatings are thick enough to bridge the hairline cracks that develop naturally in stucco over time, preventing water from infiltrating those cracks. Second, they form a continuous waterproof membrane across the entire stucco surface, which is critical in Florida’s frequent heavy rain. On stucco, elastomeric coatings typically outlast standard acrylic paint by three to five years.

 

What paint finish is best for the exterior of a house in Florida?

For Florida homes, the recommended finish system is satin finish on all siding and main wall surfaces, and semi-gloss on all trim, doors, window frames, and shutters. Satin provides durability, moisture resistance, and easy cleaning for large surfaces, while semi-gloss adds additional hardness and cleanability to high-contact, high-exposure areas. For stucco homes specifically, flat or low-sheen acrylic or elastomeric coatings are often preferred because they hide texture variations better than reflective finishes.

 

What colors are most popular for exterior house painting in Jacksonville?

The most popular exterior paint colors for Jacksonville homes are soft coastal blues, warm beige and sand tones, light and medium grays, classic white with dark trim, and muted sage green. These palettes are popular because they complement Northeast Florida’s natural landscape, hold up well under intense UV exposure, and suit the dominant architectural styles in the area — from coastal cottage to newer suburban construction.

 

How do I know if my house in Jacksonville needs to be repainted?

Signs that a Jacksonville home needs exterior repainting include: paint that is peeling, bubbling, or cracking away from the surface; visible mildew or algae staining that cannot be cleaned off; colors that have faded significantly from their original appearance; bare spots where paint has worn through to the substrate; caulking around windows, doors, or trim that is cracked, missing, or no longer adhering. Any of these signs indicate that the paint system has failed and the home needs attention.

 

Can I paint my own house exterior in Jacksonville, or should I hire a professional?

Homeowners can paint their own exterior, but the most common cause of early paint failure is inadequate preparation — which is also the most physically demanding part of the job. Professional painters have pressure washing equipment, scaffolding, and the experience to identify and address substrate issues that most homeowners will miss. For a home larger than 1,500 square feet, or any home with stucco, soft wood, or known mildew issues, professional preparation and application will deliver significantly better longevity than a DIY project.

 

What is the best primer for exterior painting in Florida?

The best primer for exterior painting in Florida depends on the substrate. For wood siding, an oil-based primer or shellac-based primer provides the best stain blocking and adhesion. For stucco, a masonry primer or direct-to-surface acrylic primer is appropriate. For fiber cement (Hardie Board), the factory primer is sufficient if topcoated within 90 days; otherwise, spot-prime with a premium acrylic primer. For any surface with rust, tannin bleed, or water staining, use a specialty stain-blocking primer before topcoating.

 

How much does it cost to paint the exterior of a house in Jacksonville, FL?

Exterior painting costs in Jacksonville vary based on the size of the home, surface type, condition, and paint product selected. A typical single-story home of 1,500 to 2,000 square feet ranges from $2,500 to $5,000 for professional preparation and two-coat application with premium paint. Larger homes, two-story structures, and homes requiring significant surface repairs will be higher. Homes with stucco that requires elastomeric coating may also carry a higher material cost. For an accurate estimate, contact A New Leaf Painting at 904-615-6599 for a free on-site assessment.

About A New Leaf Painting — Jacksonville’s Exterior Painting Specialists

A New Leaf Painting was founded in Jacksonville, Florida, and has been serving homeowners throughout Northeast Florida since 2003. Our team has completed more than 5,000 exterior residential painting projects across Jacksonville, Jacksonville Beach, Atlantic Beach, Neptune Beach, Ponte Vedra Beach, Fleming Island, Orange Park, and surrounding communities.

Our expertise is specific to the challenges of Florida exterior painting — the UV exposure, the humidity, the coastal salt air, and the stucco-heavy construction that makes Florida homes different from homes in other parts of the country. We have developed our product and process recommendations through real-world observation of how specific paint products perform in this climate over years and decades, not just based on manufacturer specifications.

We hold all required Florida contractor licenses and carry full liability and workers compensation insurance. Our work is backed by a comprehensive warranty on both workmanship and materials.

What We Offer Jacksonville Homeowners

• Free exterior painting estimates with no obligation
• Professional color consultations using Sherwin-Williams and Benjamin Moore color systems
• Full surface preparation including pressure washing, repairs, and caulking
• Premium paint systems matched to your specific surface type and exposure level
• Documented two-coat application with material records provided to homeowner
• Warranty on workmanship and paint performance

Ready to Protect Your Jacksonville Home?

Call or text 904-615-6599 to schedule your free exterior painting estimate.

Serving Jacksonville, Jacksonville Beach, Ponte Vedra, Atlantic Beach, Neptune Beach, Orange Park, and Fleming Island.